Amusement park equipment supplier - DINIS

What are the malfunctions and solutions of kids carousel ride

The carousel rides are very welcomed by both kids and adults, what normal malfunctions will occur during operation ?How to resolve them?

Can’t start。 Electric control cabinet and line fault.First, check whether the electric control cabinet is working, and check whether the power indicator of the electric control cabinet is on. If the light is on, there is no problem with them. If the indicator is off, you shouldcheck whether the circuit connecting the power to the electric control cabinet is broken or short circuit.If there is no problem, then open the electric control cabinet to check whether the relay knife is closed and whether the insurance is fusing. If so, close and replace it.If the fault still exists, check whether the circuit connecting the electric control cabinet to the conductive ring of the revolving horse is broken (the position of the conductive ring is in the middle column of the revolving horse), whether the circuit connecting the conductive ring to the motor is broken, and if so, reconnect or replace the circuit.In addition, check the conductive ring and carbon brush contact part without dust and bad contact, if there is a screwdriver can be pressed a few times.

  1. Motor failure.If there is no fault in the electric control cabinet and the circuit or the troubleshooting still cannot be started, it is necessary to check whether there is a fault in the motor. Remove the belt on the pulley of the motor and start the power button of the electric control cabinet, then check whether the motor is working or not. If it is not working, the motor is damaged and needs to be replaced.
  2. Excessive shaking and noise

The problems of jitter and excessive noise are caused by the unstable operation of the turntable, If there is a leak, it needs to be replaced or repaired. If there is not enough air pressure, the tire can be inflated.

PREV
NEXT

RELATED POSTS

Leave a Reply

*

*

   

Leave a message