Amusement park equipment supplier - DINIS

The inspection and maintenance of amusement equipment

The inspection and maintenance of amusement equipment is a very important daily work, which not only requires special personnel to take charge, but also requires the establishment of perfect rules and regulations to restrict and guarantee the work quality.Equipment maintenance, inspection and drug sales should be normalized and institutionalized, and people can be traced if problems occur.

  1. Check whether the connection part is firm, whether the metal frequently moving connection part is refueling, whether the electrical circuit and common parts are damaged, to ensure the safety, integrity and normal operation of the equipment
  2. Do a good job of cleaning and disinfection of amusement equipment, and refine the materials and functions of different equipment to cleaning supplies, methods and disinfection supplies and methods.
  3. When cleaning the circuit and electrical parts of amusement equipment, firstly make sure the power is cut off, and do not irrigate, generally use cloth to scrub, and then connect the power when it is finished, make sure it is safe
  4. All amusement equipment, open slide and drill pipe should not have water after the rainy day. If there is water, a hole with a diameter of 4mm should be made at the low level of ZUI for drainage
  5. All amusement equipment, open slide and drill pipe should not accumulate water after rainy day. If so, a hole with diameter of 4mm should be made in the lowest place to drain water.
  6. If it is an indoor activity room, floor, wall, etc., daily uv radiation to remove toxic, indoor ventilation should be frequent.Spray with hydrogen peroxide once a week.
PREV
NEXT

RELATED POSTS

Leave a Reply

*

*

   

This site is protected by wp-copyrightpro.com

Leave a message