Amusement park equipment supplier - DINIS

How does Carousel update widgets?

How to update widgets on carousel amusement equipment?

Check the tightness of bolts and screws and tighten them in time.

After using the equipment for a period of time, the whole equipment should be overhauled once to ensure that the equipment can be in a good running state.

The fasteners of the whole machine should be checked frequently (pay attention to the safe parts of the firm parts), find out the reason in time if loose, timely repair and fastening, to avoid accidents.

Regularly check the operation of mechanical transmission parts, pay close attention to the abnormal sound and heat generated in the operation process, find the fault and eliminate it in time.

Mechanical operating parts such as reducer, rotary support bearings, gear meshing parts should be lubricated regularly.The equipment has been lubricated when leaving the factory. In the initial operation, it is generally not necessary to add the main rotary gear to lubricate once a week as the case may be.

The rotary bearing is lubricated once a month, and the lubricating oil in the reducer is cleaned and replaced once every six months.Note: The gear oil must be replaced once after the new equipment runs normally for two months.

The fuselage and FRP parts should be kept clean frequently. When there is dirt, it should be cleaned with soft cloth, wet cloth or a small amount of detergent.FRP parts can be rubbed with automobile polish wax to maintain luster.

PREV
NEXT

RELATED POSTS

Leave a Reply

*

*

   

This site is protected by wp-copyrightpro.com

Leave a message
[contact-form-7 id="133" title="LeaveMessage - Form"]